Erros vag-com

Boas pessoal, venho pedir ajuda para o seguinte: Fiz um scan ao meu argolas e deu-me estes erros. Alguem me pode ajudar?
Address 08: Auto HVAC Labels: 8P0-820-043.lbl
Part No SW: 8P0 820 043 AH HW: 8P0 820 043 AH
Component: KlimavollautomatH19 0430
Revision: 120406 Serial number: 8P0820043AH
Shop #: WSC 00000 000 00000
VCID: 72EFDEFB118B

2 Faults Found:
00796 - Fan for Interior Temp Sensor (V42)
011 - Open Circuit - Intermittent
Freeze Frame:
Fault Status: 00101011
Fault Priority: 3
Fault Frequency: 4
Reset counter: 17
Mileage: 148886 km
Time Indication: 0
Date: 2011.12.24
Time: 13:15:15

Freeze Frame:
Voltage: 12.10 V
Temperature: 21.0°C

01273 - Fresh Air Blower (V2)
010 - Open or Short to Plus - Intermittent
Freeze Frame:
Fault Status: 00101010
Fault Priority: 3
Fault Frequency: 4
Reset counter: 20
Mileage: 148928 km
Time Indication: 0
Date: 2011.12.27
Time: 19:13:00

Freeze Frame:
Temperature: -50.0°C
Speed: 2.6 km/h
(no units): 229.0
(no units): 248.0

-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 8P0-953-549-F.lbl
Part No SW: 8P0 953 549 F HW: 8P0 953 549 F
Component: J0527 H36 0070
Coding: 0004012
Shop #: WSC 06314 000 00000
VCID: 418D413764AD

Part No: XXXXXXXXXXX
Component: E0221 H02 0030

1 Fault Found:
00883 - Ignition Switch (D) Terminal S
012 - Electrical Fault in Circuit - Intermittent
-------------------------------------------------------------------------------
Address 37: Navigation Labels: 8E0-035-192-RNSE.lbl
Part No SW: 8P0 035 192 Q HW: 8P0 035 192 Q
Component: RNS-E HIGH EU H76 0650
Revision: 08S Serial number: AUZBZ7J0301958
Coding: 0205753
Shop #: WSC 01317 552 00000
VCID: 3D753DC71855

2 Faults Found:
00858 - Connection; Radio ZF Output to Antenna Amplifier
011 - Open Circuit - Intermittent
Freeze Frame:
Fault Status: 00101011
Fault Priority: 5
Fault Frequency: 6
Reset counter: 22
Mileage: 149092 km
Time Indication: 0
Date: 2011.12.31
Time: 20:24:50

Freeze Frame:
Mileage: 149620 km
Count: 1901
Clock: 12:39

01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 7
Fault Frequency: 1
Reset counter: 223
Mileage: 148824 km
Time Indication: 0
Date: 2011.12.19
Time: 20:18:41-------------------------------------------------------------------------------
Address 56: Radio Labels: 8E0-035-192-RNSE.lbl
Part No SW: 8P0 035 192 Q HW: 8P0 035 192 Q
Component: RNS-E HIGH EU H76 0650
Revision: 08S Serial number: AUZBZ7J0301958
Coding: 0205753
Shop #: WSC 01317 552 00000
VCID: 3D753DC71855

2 Faults Found:
00858 - Connection; Radio ZF Output to Antenna Amplifier
011 - Open Circuit - Intermittent
Freeze Frame:
Fault Status: 00101011
Fault Priority: 5
Fault Frequency: 6
Reset counter: 22
Mileage: 149092 km
Time Indication: 0
Date: 2011.12.31
Time: 20:24:50

Freeze Frame:
Mileage: 149620 km
Count: 1901
Clock: 12:39

01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 7
Fault Frequency: 1
Reset counter: 223
Mileage: 148824 km
Time Indication: 0
Date: 2011.12.19
Time: 20:18:41

Desde já o meu obrigado a todos.
 
01273 - Fresh Air Blower (V2)

Possible Causes
Fresh Air Blower (V2) defective
Control Module for Fresh Air Blower (J126) defective
Short of open circuit in wiring to Fresh Air Blower (V2)
Climatronic Control Module (J255) malfunctioning
Possible Solutions
Check Fresh Air Blower (V2)
Perform Output Test (Check Air Vents while Blower is active)
Check Meas. Blocks while Blower is active
Check Control Module for Fresh Air Blower (J126)
Perform Output Test (Check Air Vents while Blower is active)
Check wiring and connectors

00858 - Connection; Radio ZF Output to Antenna Amplifier : Short to Ground
Possible Symptoms
Radio Tuner not working
Possible Causes
Wiring/Connectors from/to Antenna Amplifier faulty
Antenna Amplifier faulty
Possible Solutions
Check Wiring/Connectors from/to Antenna Amplifier
Check Measuring Value Blocks (MVB)
Check Antenna Amplifier
Category: Fault Codes

01044 - Control Module Incorrectly Coded

Possible Symptoms
Reduced Functionality
Possible Causes
Control Module incorrectly coded
Possible Solutions
Check Gateway Installation List
Check/Fix Control Module Coding
See Vehicle Specific Diagnostic Procedures for Details
Special Notes
When found in CAN-Gateway:
On a Long Coded module, use the Gateway Installation List to check for unreachable or not registered control modules. Then update the Gateway [Installation List] by altering the Gateway Coding manually.
On a Short Coded modules, refresh the original coding with the same value. For example, code it from 00006 -to- 00006 without making an actual change.
When found in the Comfort System on the VW New Beetle/Cabriolet (1C/1Y/9C) this may be a bug in the module that will be resolved by refreshing the coding with the same value as described above with the CAN Gateway example.
 
eu ate mais ou menos entendi ... mas acho que ficava na mesma quanto a resolver o assunto ... e acho que ele talvez tenha ficado na mesma.
 
eu ate mais ou menos entendi ... mas acho que ficava na mesma quanto a resolver o assunto ... e acho que ele talvez tenha ficado na mesma.
Pois eu mais ou menos entendi os erros que tinha, só não sei é como os vou resolver.
por exemplo este:(Ignition Switch (D) Terminal S) o que faço?
 
Back
Top